Babytrend CS31983 - FLEX-LOC INFANT CAR SEAT - ALL STAR User Manual

FLEX-LOC INFANT CAR SEATConvenience through innovation and thoughtful designwww.babytrend.comKEEP INSTRUCTIONS FOR FUTURE USE.Carefully read and under

loosening. This combination seat belt does not require a locking clip (Fig. 19-1).• A lap/shoulder combination belt system with a latch plate that

21205.0 FEATURES5.0 FEATURESSAFETY SEAT FEATURES AND THEIR PROPER USE5.1 5-Point HarnessCarry HandleCanopyHandle Release ButtonHarness ClipVehicle B

5.0 FEATURES23225.0 FEATURES5.3 Rear View of Fixed Back ModelHarness SlotsCanopySeat Angle IndicatorHarness BeltOwner’s Manual HolderBelt Adjuster Pl

25245.0 FEATURES 5.0 FEATURESYour Safety Seat base can be installed with either the vehicle belt or with the included LATCH attachment system.To prop

27265.0 FEATURES 5.0 FEATURESSeat Angle IndicatorCORRECTWRONG20 pounds(9 kg) and under 20 to 30 pounds(9 to 13.6 kg)Locking Clip

29285.0 FEATURES5.8 Attaching the CanopySlip the canopy stays through the sleeves on the canopy.The canopy is attached by inserting the ends of the c

5.0 FEATURES31305.0 FEATURESstraps to be even with or just below your child’s shoulders. (Fig. 30-1) The harness straps are adjusted as follows:1. Re

5.0 FEATURES33325.0 FEATURES10. Before using the Safety Seat, please pull on the Harness Straps from the front to ensure that they are securely reatta

35346.0 INFANT RESTRAINTUSING INFANT RESTRAINT6.1 Securing your Child in the Safety Seat / CarrierIn a crash, the safety seat provides no protection

6.0 INFANT RESTRAINT366.2 For the 5-Point Harness• Type A: Put the two buckle tongues together, overlaying the left buckle tongue onto the right buc

TABLE OF CONTENTSWARNINGS TO ALERT YOU TO POSSIBLE DANGERS ... 4HOW TO REGISTER YOUR SAFETY SEAT ...

7.1 Preparation1. Park your vehicle on a level surface so that the level indicator located on the left side of the Safety Seat will properly indicate

4. See Fig. 39-2 for the proper threading of the vehicle belt through the Base and Fig. 40-1 for the proper threading of the belt through the Safety S

9. A lap/shoulder combination seat belt with a buckle that can slide freely along the seat belt may require the use of a locking clip. (Fig. 42-2) C

1. Remove any toy or other objects attached to carry handle before installing car seat in vehicle. 2. Locate a LATCH seating position as identied in

hook release button on each connector to release the connector from the anchor. (Fig. 46-1b) 7.4 Setting Proper Recline of the Safety Seat / BaseF

proper angle of recline, place a rolled towel, or car seat noodle, under the base at the foot end to achieve the correct position. (Fig. 48-1)2. Safe

ADDITIONAL INFORMATION9.1 Using the Safety Seat in an AirplaneThis Safety Seat may be used without the Base in an airplane in the same manner as it i

on Pad. Thread the Harness Straps through Buckle Tongues and Harness-Tie. See section Adjustment of the Shoulder Straps for re-threading of shoulder

2.0 REGISTER1.0 WARNINGWARNINGS TO ALERT YOU TO POSSIBLE DANGERSThe ultimate safety of your child depends on the proper installation of the Safety Sea

3.0 SAFETYthe safety of your child. Quick turns, sudden stops, or other maneuvers in avoiding a crash, as well as a crash, can injure your child if n

3.0 SAFETY3.5 About this Safety Seat• This Safety Seat is constructed of plastic that can deform over time if left with any object in the seat while

- DO NOT suspend strings on or over carrier.- DO NOT attach strings to toys.- DO NOT place the carrier near a window where cords from blinds or drapes

4.0 LOCATION• If the driver is the only adult in the vehicle and the child requires constant monitoring, then the forward seating position may be use

15144.0 LOCATIONfor use with the Safety Seat. Even newer vehicles can have seat belts systems that are not safe for use with the Safety Seat. These

• DO NOT use a seat belt that is anchored on the seat more than 2 inches forward of the crease between the seat bottom and the seat back. This type